Air tightness monitoring is an indispensable process in the production and use of ductile iron pipes. It is an important process to ensure product quality and production safety. Gas leak detection includes leakage detection of toxic gases, leakage detection of combustible gas, and detection of air tightness. . Most of the first two can be detected by chemical sensors, usually during the use of components or systems. If there is a suitable sensor, the method is relatively simple.
High Speed self-Recovery Rapid doors are the technological evolution of old, PVC high speed doors or heavy folding doors, now obsolete and not suited to today's industrial needs.
High-quality panels, the resistive safety edge fitted to the bottom edge of the door, photocells and barriers make this product both safe and durable, being totally self-repairing, thanks to its special [Anti Crash System".
This door designed with a perimeter structure in galvanized or stainless steel, which is ideal for sliding panels. The door panel rides effortlessly within a track, thanks to the special profile and hinge designed by us, requiring low maintenance. The panel is rolled up on a roller placed within the upper crossbeam.
The door can be equipped with a counterweight or ups batteries, to fully open the door in case of power failure, and can also be equipped with large transparent sections to create a brighter and safer working environment.
Self-Repairing Door Curtain made of reinforced PVC, with flexible weighted soft bottom edge.
The edge of curtain has continuous injection molded teeth that then move up and down in a self-lubricating polyethylene track attached to structural galvanized side frames.
Self-Recovery Rapid Door,Self Recovery PVC Rapid Door,Self Recovery Rapid Rolling Door,Self Healing Roll Door Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.selfrepairinghighspeeddoor.com
Ductile iron pipes are protected by a 180 degree prime wall. The airtightness test needs to cover the cast iron pipe, if there is leakage, it needs to clean up the soil and break the prime work, which will inevitably affect the progress of the project.
In common project implementation methods, we generally adopt the following methods to check the airtightness of ductile iron pipes: Common methods for airtightness detection include bubble method, smear method, chemical gas tracer leak detection method, pressure change method, flow rate Law, ultrasonic method, and so on. The traditional method of detecting leaks uses bubble method and smearing method. The bubble method involves immersing the workpiece in water, filling it with compressed air, and collecting air bubbles leaking from it for a certain period of time to measure the amount of leakage. The smearing method is to apply a bubble-like liquid such as soapy water to a surface of a workpiece filled with a certain pressure, and observe the occurrence of air bubbles to detect the amount of leakage.
These two methods are simple to operate, and can directly observe the location and leakage of the leak. However, due to the leakage of parts and several leaks in advance, it is difficult to collect full bubbles and affect the accuracy of measurement. Secondly, it is bulky and bulky. Parts with complex external surfaces, air bubbles adhere to the bottom of the part and folds are not easy to observe; after the test, the workpiece needs to be cleaned and dried, and automatic and quantitative leak detection cannot be achieved.
The ductile iron pipe testing method is provided for everyone.