Kitchen Accessories,Kitchen Cabinet Accessories,Kitchen Board,Kitchen Supplies JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD , https://www.meiaogroup.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge> Several new types of coordinate measuring machine products from foreign companies Several new types of coordinate measuring machine products from foreign companies
The product of the British Disc company /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
(1) Talon coordinate measuring machine â–¡
The series of coordinate measuring machines are different in skill from other measuring machines; that is, the series measuring machines use mechanical bearings instead of air bearings; and the "intermediate frame" drawing idea is selected; the user-selected operating software can reach its own The level of clutter. The company believes that the reason why the series of coordinate measuring machines do not use air bearings is that: if air bearings are used; the air supply for a year is very expensive; and the air supply system needs to be timed. They think; although the mechanical bearings are Wear is accepted during operation; however, the mechanical bearings on the machine are not always replaced; in contrast, the load on the bearings used in the coordinate measuring machine is very light. The measuring space of the new Talon measuring machine is 600 × 500 × 450 (mm); can be used in the workshop environment.
(2) Polar coordinate measuring machine â–¡
This coordinate measuring machine represents a new level of portable rocker-type 3D measurement accuracy skills; its resolution reaches 3μm. The modular six-coordinate measuring machine was developed under the auspices of the DTT Fund. The machine's base is somewhat fixed. On the outer surface of the work; its three articulated joints connect the two hollow arms to the probe head. The joints of the Polar Coordinate Measuring Machine are based on double races, high precision, preloaded aerospace bearings. And the original purpose of the measuring machine is to conveniently measure the gages, fixtures and tooling in the workshop; together for the installation and measurement of points, prism dimensions and generalization data; to compare these data with CAD data; then for Reverse Engineering. Polar is one of the only portable rocker-type measuring machines available today that can satisfy the increasing demand for on-site inspection under the conditions of the workshop.
The LK Ultra measuring machine produced by the company can reach the sub-micron level; the repeat positioning accuracy is 0.5 μm; the spatial precision is (0. 9+L/500) μm in its entire measurement space, depending on the type. The measurement space of the machine ranges from 1000×1000×800 (mm) to 2500×1000×800 (mm). The above data is assumed to be obtained under the constant temperature environment of humidity control and (20±0.5) °C.
Product of Mitutoyo, Japan
(1) Leges measuring machine â–¡
The company's Leges measuring machine is the most sub-micron precision production measuring machine; the space measurement accuracy of the machine is (0.48+L/1000)μm; its ambient temperature requirement is 18~20°C. It has independent X and Y coordinates and oscillation control system; it can eliminate the influence of ground oscillation. The drive system and measurement system of the machine are placed in the middle of the mass of the measuring machine; to eliminate the errors such as rugged, tumbling or smashing.
(2) Digital sensor â–¡
The sensor uses radio waves to transmit measurement data from the handheld measurement surface to the print processor. The sensor can be connected to the data output slot of Mitutoyo's Digimatic positive caliper; wireless can be completed in 50m range Transmission. The sensor can also be retrofitted to 150mm and 200mm calipers. The Digimatic caliper's processor has a record and profile function; it can also be connected to a personal computer; each Digimatic sensor can be assigned a unique identification. Code; allows up to 100 calipers to send signals to a receiver at the same time. The sensor uses a lithium battery; it can perform 4.5 million data transfers.
The products of Taylor Hobson of the United Kingdom The HoloMapper and SurfAce measuring instruments developed by the company use laser holographic imaging skills and CCD optical sensing skills to collect and visualize the measured external data. This thoroughly closed skill has already been used on satellites. Used to make surface graphics; now it has been used for shop measurement; it can measure workpiece flatness and volume without exceeding 300×300 (mm). The company also developed the Surtronic Duo portable surface roughness measuring instrument and the new Talyscan150 Touch and non-touch scanners. The former can measure parameters Ra and Rz, the latter can be used for 3D measurement; laser scanning for 10×10 (mm) large appearance takes only 5 minutes. □ The product of Virtek Vision Canada The Virtek Laser QC developed by the company is a new non-touch measuring machine; it can perform rapid detection on 2D steel plates; and can carry out reverse engineering drawing without drawings. Place the workpiece to be tested at 800×800 (mm) on the glass test stand; use laser to face it from the top; usually reach the accuracy of ±0.05 mm in 10 seconds; after selection Scan the image; and set the required scanning resolution; the laser can be triggered to scan; and transfer the part data to the computer system. The workpiece trace can be displayed on the computer screen in real time.
Recommend to friends comments close window Bearing related knowledge The use of metal self-correcting materials on bearings (1)
Bearing professor brief description bearing false Brinell indentation traction motor bearing damage caused traction system instability instability repair bearing information
NTN bearing problems and damages
This article links to http://
Please indicate the bearing network http://
Previous:The layout and function of "cylindrical roller bearing" is discussed in detail. The following is a detailed discussion on the use and characteristics of self-aligning ball bearings.
Several new types of coordinate measuring machine products from foreign companies
Source: China Bearing Network Time: 2017-09-23