Emergency light can be divided into indoor emergency lights and outdoor emergency lights , indoor emergency light and outdoor emergency lights are determined by the protection level of emergency light , general protection level is low can only be applicable to indoor . Indoor emergency lights can be used in commercial buildings , shopping malls , hotels , restaurants , etc .
Emergency Dual Heads Led Light,Twin Spot Led Emergency Light,Ni-Cd Battery Emergency Led Light Jiangmen City Pengjiang District Qihui Lighting Electrical Appliances Co., Ltd , https://www.qihuilights.com
Scientific and technological innovation drives the contrarian development of Fujian machine tool industry
Since the 18th National Congress, the machine tool industry in Fujian Province has implemented an innovation-driven development strategy. A number of high-end technical equipment have filled the domestic gap, and some technologies have reached the international advanced level. The GDP has grown at an average annual rate of 15%, and the entire industry has developed against the trend.†Fujian Chen Qingyou, the head of the Provincial Machinery Industry Federation, is very proud to introduce the development of the Fujian machine tool industry to the China Industry News reporter. The third member representative conference of the Fujian Machine Tool Industry Association (hereinafter referred to as Fujian Machine Tool Association) and the first meeting of the third council have been successfully concluded. However, the spring information revealed by the conference is evocative, especially near In the past few years, the machine tool industry in Fujian Province has relied on technological innovation and has become increasingly prominent in the industry. "We want to build a community of destiny in the Fujian machine tool industry, strengthen our own construction, and focus on innovation and development." Su Yashuai, president of the Fujian Machine Tool Association, has a strong resonance within and outside the industry. Fujian machine tools have changed from weak to strong. “The machine tool industry in Fujian has been weak to strong in recent years, especially in the last four years. It is very gratifying. We must constantly explore market demand, strengthen innovation, improve quality and promote the industry. Progress.†Chen Wenzhao, director of the former Machinery Industry Department of Fujian Province, gave a pertinent evaluation of the development of the machine tool industry in Fujian. In 2017, the trend of the machinery industry in Fujian Province is obvious. Although the machine tool industry in Fujian Province is relatively low in the province's industrial economy, it is one of the industries with a relatively high growth rate of Fujian machinery industry. From January to December 2017, the output value of metal processing machinery was 13.332 billion yuan, up 12.2% year-on-year. The sales value of sales was 13.11 billion yuan, an increase of 13.1%; the export delivery value was 530.75 million yuan, an increase of 28.8%. In particular, the demand for processing equipment for consumer electronic products is growing rapidly. Under the rigid demand for economic growth along the “Belt and Road†countries, the quality and brand of Fujian machine tool products have been improved, attracting more and more foreign distributors to purchase Fujian. Machine tool products, especially the export of Fujian auto parts, have grown at a faster rate, which have promoted and stabilized the production of machine tools in Fujian. Jiang Zongyao, vice president of Fujian Machine Tool Association, said: "In the past year, the national machinery industry has gradually recovered. The province's machine tool industry has accelerated the pace of transformation and transformation in the national economic environment. The strength of the upward growth, the other part of the business is not good, the debt is too high, the adjustment and transformation is too slow, continue to withstand downward pressure, the whole industry is still in the process of differentiation." However, the Fujian machine tool industry has always adhered to the general tone of reform, innovation, pragmatic work, initiative Adjustment and positive transformation, especially the Fujian Machine Tool Association and the Provincial Machinery Industry Federation jointly organized the 2017 Fujian Workers' Numerical Control Technology Application Skills Competition to promote the growth of high-skilled talents in Fujian Province; and held a scientific and technological innovation 2030 major science and technology project demonstration meeting. Help enterprises and institutions of higher learning in Fujian to identify the research direction of science and technology projects. Significant achievements in technological innovation "The downward pressure on economic operation in recent years is great. However, the spirit of the enterprise in the machine tool industry in Fujian has been revamped, the whole industry has developed steadily, and the results have been remarkable in terms of intelligent transformation, quality improvement and efficiency improvement. Actively introducing talents, cultivating craftsmen, and building research and development. The team, the establishment of industry-university-research alliance, collaborative innovation is remarkable. It can be said that the entire industry has developed against the trend, especially the emergence of Jiatai Company, which is in the forefront of the industry in terms of intelligent manufacturing." Director of the former Machinery Industry Department of Fujian Province Xia Yuhu spoke highly of the development of Fujian machine tools. From 2014 to 2017, under the guidance of national macroeconomic policies, Fujian machine tool industry enterprises implemented an innovation-driven development strategy, vigorously developed high-tech industries and strategic emerging industries, vigorously transformed traditional industries with high technology, and actively cultivated new growth. Motivation to continuously improve the level of total factor productivity. At the same time, we will further promote the "three to one, one reduction and one supplement", accelerate the adjustment of supply structure, major changes in the product structure of enterprises, and high-tech products have become the core products of enterprises. The business model of the company has also undergone major adjustments, from mass production to personalized customization. Enterprises pay more attention to intellectual property protection. The deep integration of industry, academia and research is accelerating, and most of the innovative technologies and innovative products of machine tool enterprises have cooperated with universities. Jiatai CNC is the only board city in China that is “Made in China 2025†– the leading company in the “CNC generation†industry in Quanzhou, with 57 patents. In terms of high-end equipment, Jiatai CNC provides customers with a series of high-end intelligent equipment with adaptive capabilities, which realizes self-detection, self-correction, fault prediction and remote control. In terms of industrial informatization, Jiatai CNC has established a large-scale cloud manufacturing equipment management platform in China, which can connect thousands of customers' processing equipment to the Internet of Things. The innovation of Wino CNC technology is eye-catching. The compound seven-axis gantry produced by the company has synchronous control of symmetrical spindle and multi-axis position, realizes multi-head composite processing, and can complete milling, boring, drilling, expanding, reaming, tapping and other multi-process processing at one time. The products have been appraised by China Machinery Industry Federation to fill the domestic gap, and some technologies have reached the international advanced level. The double-action column horizontal machining center produced by Wino CNC has been appraised by China Machinery Industry Federation to fill the domestic gap, and some technologies have reached the international advanced level. The 3S high-speed vertical machining center produced by Wino CNC has won the title of Excellent New Product of Fujian Province. Zhongke Zhonghan Laser Equipment (Fujian) Co., Ltd. is the first high-tech enterprise specialized in the development of ultra-fast laser micro-machining equipment. Ultra-fast laser micro-hole machining CNC machine tool uses ultra-fast laser as the "tool". It is a brand-new processing technology after machining, flame processing and electric processing. The performance, various indicators and "super fast" and "super" The technology of “fine†and “cold processing†has reached the domestic leading level and the international level, filling a number of domestic gaps in the fields of automobile, aviation and medical care, breaking the monopoly of foreign countries in this industry. The CNC vertical lathe, CNC vertical grinding machine, double-column CNC vertical lathe, XT6111 horizontal boring and milling machine and ram milling machine of Fujian Success Machine Tool Co., Ltd. are highly sought after by the market. For many years, Donggang Precision has been committed to the R&D, manufacturing and application of high-end precision machinery. It has obtained ISO international certification, and many high-end technologies have obtained domestic and international patents. The MK84125 CNC roll grinder and MGK8463 high-precision CNC roll grinder independently developed by Fujian Dayu Heavy Duty CNC Machine Tool Co., Ltd. have been accepted by Turkish customers. It is the first Chinese high-end CNC grinder product in Turkey and the first high-end CNC grinder product in the European market. . Su Yashuai said: "Science and technology innovation is the only way for the development of the industry. Fujian machine tools will increase the system of production, education and research to make the industry more stable development."