Recently, there have been many major events in the machine tool industry. The diligent Xiaobian has carefully combed it for everyone. Let’s take a look! Wang Yuping, deputy general manager of Anyang Machine Tool, resigned On November 1, 2018, Anyang Machine Tool announced that the company's board of directors had received the resignation report submitted by Mr. Wang Yuping, the deputy general manager in charge of production work on October 30, 2018. The resignation took effect on November 1, 2018. It is understood that Wang Yuping holds 1,458,000 shares of Anyang Machine Tool, accounting for 1.08% of the company's share capital. After Mr. Wang Yuping resigned, he no longer held other positions in Anyang Machine Tool. The data shows that Anyang Machine Tool's operating income in the first half of 2018 was 87.327 million yuan, an increase of 54.73% over the same period of the previous year; the net profit attributable to the listed company's shareholders was -1.474 million yuan, a decrease from the previous year -597.32 million yuan. . Shield An Group sells machine tool subsidiary On November 5, the Beijing News reported that the Dunan Group recently withdrew from Ningbo Yaojiang Machine Tool Manufacturing Co., Ltd., and the Dunan Group completed another important asset transfer. The National Enterprise Credit Information System shows that Ningbo Yaojiang Machine Tool Manufacturing Co., Ltd. recently completed the shareholding change, and the shareholders such as Dunan Holding Group Co., Ltd. withdrew. Today, the shareholders are two natural persons, Zhu Jiangyi and Li Yulin. "S-shaped test piece" enters the final draft stage of international standards On November 5th, the Ministry of Science and Technology released information indicating that the ISO/TC39/SC2 “International Organization for Standardization/Machine Tooling Committee/Metal Cutting Machine Tool Inspection Conditions Subcommittee†was held at the 83rd meeting of the Salzburg Chamber of Commerce in Austria. By voting, the “S-shaped test piece†independently developed by AVIC Chengfei Industry (Group) Co., Ltd. for the precision detection of five-axis CNC machine tools, and entered the final draft of the International Standard (FDIS). It marks that the “S-shaped test piece†is about to enter the international standard sequence. This is the first time that China has developed an internationally recognized general standard in the field of metal cutting machine tool testing. China International Import Expo was held From November 5 to 10, 2018, sponsored by the Ministry of Commerce of the People's Republic of China and the Shanghai Municipal People's Government, China International Import Expo, hosted by China International Import and Export Expo and National Exhibition Center Co., Ltd., will be grandly held at the National Convention and Exhibition Center (Shanghai). Held. It is reported that there are 7 exhibitors in the world's top ten metal cutting machine tools, including Demaggio, Mazak, EMAG, GF, Makino, Daxie, etc.; TRUMPF and Baichao will also participate in the world's three major laser cutting brands. There are also four exhibitors in the world's top five tool brands, including Sandvik, *, Seco, and Iskar. In addition, the first supplier of China's aerospace-specific machine tools, Starrag, and the world's top two in the world of industrial measurement, Carl Zeiss and Mitutoyo. Jinshang Machine Tool China Announces Yingxi Announcement Recently, Jinshang Precision Machine Tool (China) Co., Ltd. (abbreviation: Jinshang Machine Tool China) announced the announcement of Yingxi, the announcement shows that according to Jinshang Machine Tool China’s unaudited consolidated management accounts for the six months ended September 30, 2018. Initial review and currently available information, Jinshang Machine Tool China expects profit attributable to owners of the company for the six months ended September 30, 2018 to increase significantly compared to the six months ended September 30, 2017 At 100%. It is understood that the significant increase in profit attributable to machine tool owners in the six months ended September 30, 2018 was mainly attributable to the increase in sales revenue recognized by the Group for the sale of CNC high-precision machine tools. Kunming Machine Tool Announces the Progress of H Shares Resumption Kunming Machine Tool recently announced the progress report on the resumption of H shares. The forensic audit institution was originally scheduled to start work in early September and complete the approach investigation in November. The actual work carried out was delayed due to the delay in the company's periodic payment. . The company plans to pay the phased expenses in November and cooperate with the forensic auditing as soon as possible, and complete the work as far as possible according to the original working time period. By the beginning of February, the relevant forensic audit report will be issued. At the same time, Kunming Machine Tool is expected to issue an internal control report from April to May 2019, which will be submitted two months later than the original time. In addition, Kunming Machine Tool H shares continued to be suspended. The national major special project of CNC machine tools and the on-site matchmaking meeting in the automotive field were held On November 5th, it was hosted by the “Specialized Specialized Management Office of “High-end CNC Machine Tools and Basic Manufacturing Equipmentâ€, the Industrial Development Promotion Center of the Ministry of Industry and Information Technology, Shanghai Jiaotong University, etc. Jiaoda Zhibang Technology Co., Ltd. was held. Experts from all walks of life and in the field of machine tools and automobiles will discuss how to promote the automotive industry and the machine tool industry to jointly advance and promote the transformation and upgrading of high-end manufacturing equipment and intelligent manufacturing in the automotive field. At the meeting, Vice Minister of Industry and Information Technology Xin Guobin, Academician of the Chinese Academy of Engineering, and Lin Zhongqin, President of Shanghai Jiaotong University, delivered speeches. Japan International Machine Tool Show held JIMTOF2018 Japan International Machine Tool Show was grandly opened today at the Big Sight International Exhibition Center in Tokyo, Japan. JIMTOF2018 will be on November 1-6, 2018. The exhibition scale is about 100,000 square meters. It is reported that JIMTOF2018 attracts nearly 1,000 companies from all over the world. The company came to the exhibition and nearly 300 overseas exhibitors, including nearly 50 Chinese companies, which is the highest in history. Dr. Ge Xingfu from Shenyang Machine Tool won the "Friendship Award" from the Chinese government On September 30, the 2018 Chinese Government "Friendship Award" awarding ceremony was held in the Great Hall of the People in Beijing. Dr. Ge Xingfu, a German expert recommended by Shenyang City and special adviser to the chairman of Shenyang Machine Tool (Group) Co., Ltd., won this award and became the only one of the 50 winners this year from the machine tool manufacturing industry. It is understood that Dr. Ge Xingfu was hired by Shenyang Machine Tool Group in 2011 as the chairman of the company's chairman; in 2016, as a representative of Shenyang Machine Tool, he was elected as the chairman of the International Production Engineering Academy (CIRP). Since the beginning of this year, the total export orders of Japan have remained at a high level. The Japanese machine tool company, Jinshang Machine Tool China, has also achieved a new high sales in China. Japan is a double harvest in the machine tool field. The convening of China International Import Expo is undoubtedly one of the events of this year. Many world machine tool giants have made the Chinese audience feel amazed, and created conditions for industry exchange. It is reported that as of today, many Chinese machine tool companies have signed purchase orders at the import and export fair. At the same time, experts from all levels and experts on the future of the machine tool industry have also benefited from the insights expressed by experts on the development of the machine tool industry. Full of confidence. The above is a brief summary of Xiaobian's recent industry events. It has been less than two months since 2019, and Xiaobian also wishes all machine tool companies to show their talents at the end of the year and achieve satisfactory results.
Ultra Plantâ„¢ Grow Light offers One Chip Technology aimed to meet your indoor growing expectation such as improve plants' quality, increase yield, or better the margin, etc., all for helping you realize a higher return on your crops.
From Ultra Plantâ„¢ APP, you are able to schedule the growing process including photoperiod, brightness and spectral in advance. The lighting system will help you grow smarter, easier and better.
450W Led Grow Light,Best Grow Light,Indoor Grow Lights,Indoor Grow Light Feton Corporation , https://www.ftplantled.com
Ultra Plantâ„¢ Grow Light is combined our advanced All-In-One technology with patented optical design and customized light full spectrum supported from our experienced LED engineers, plant specialists and other partners working on horticulture.
Ultra Plantâ„¢ is the most versatile horticultural grow lighting fixture for indoor plants with flexible full spectrum, brightness control and uniform, wider light distribution, suitable for top lighting of all types of crops. No matter it applies to anywhere for any crop, Ultra Plantâ„¢ can do perfect work for you.
Recent events in the machine tool industry: machine tool giants gathered in the fair
Abstract Recently, there have been many major events in the machine tool industry. The diligent Xiaobian has carefully combed it for everyone. Let’s take a look! Anyang Machine Tool Deputy General Manager Wang Yuping resigned on November 1, 2018, Anyang Machine Tool announced that the company's board of directors on October 30, 2018...