Bathroom Vanity,Bathroom Vanity Units,Bathroom Vanities With Tops,Double Sink Vanity Ningbo Oulin Import&Export Co.,Ltd. , https://www.oulin-oversea.com
Pneumatic diaphragm pump is the correct steps?
Pneumatic diaphragm pump is a new type of conveying machinery, the use of compressed air as the power source for a variety of corrosive liquids, with particles of liquid, high viscosity, volatile, highly toxic liquid can be pumping exhaustion. Pneumatic diaphragm pump is the correct steps? 1, to ensure that the maximum particles contained in the fluid does not exceed the maximum safety of the pump through the particle diameter standard. 2, the intake pressure Do not exceed the maximum allowable pressure pump, compressed air above the rated pressure may result in personal injury and property damage and damage the performance of the pump. 3, to ensure that the diaphragm pump pressure system can withstand the highest output pressure to ensure that the drive air system clean and normal working conditions. 4. Electrostatic sparks may cause personal injury and property damage due to explosion. Use wires with enough large cross-section to properly ground the grounding screws on the pump. 5, grounding requirements in line with local laws and regulations and site requirements of some special requirements. 6, fasten the diaphragm pump and the connection pipe joints to prevent static electricity sparks generated by the impact of friction. Use antistatic hose. 7, to periodically check and test the reliability of the grounding system, grounding resistance requirements of less than 100 ohms. 8, to maintain good exhaust and ventilation, away from flammable and heat sources. 9, the diaphragm pump may contain solids in the exhaust, do not face the work area or exhaust port, so as to avoid personal injury. 10, when the diaphragm failure, the delivery of materials from the exhaust muffler squirting. 11, When transporting flammable and toxic fluids, please connect the outlet to a safe place away from the work area. 12, please use at least 3/8 "inner diameter smooth pipe wall outlet and muffler. Asia Fluid Network () Editor: Huang Nengwen, QQ: