Hydraulic Flange Hydraulic Flange,Flange Adaptor,Regular Hydraulic Flange,SAE Flange SHIJIAZHUANG TOPA TRADING CO., LTD. , http://www.topahydraulic.com
Product Description
1.This hot air soldering gun is with thermostat temperature adjusting function, with overtemperature protection with result in convenient and save usage.
2.This heat gun is with imported motor and michrome wire as a result its working life is long and heating efficiency is hight.
3.This power tool hot air gun is with good quality heat insulation inside ensures longer using life of the heating filament.
Â
Hot Air Gun JF-1600WD
Power Input
Available In 220V
Temperature Range
50-550 ºC
Temperature stability
±1ºC
Noise
<45dB
Power Consumption
1600W
Heating Element
Metal Heating Core
Air Capacity
190-350L/Min(max)
Station Dimensions
245H*200L(MM)
Package Size
280*250*80(mm)
Gross Weight
0.8 KG/Set
Features
product description of digital hot air gun heat gun:
   • LCD liquid crystal panel numerical display, patch process circuit board, the performance is more stable and reliable.
   • Import motor, high-performance, longer service life.
   • Imported biotite Ni-Cr alloy wire heating core, overheat protection device, rapid heating, power foot, long life.
   • Double vortex air outlet, soft wind does not damage the device.
   • Sensor closed loop, microcomputer zero trigger temperature control, temperature accuracy and stability.
   • Push-button thermostat 10 degrees a tune, the minimum temperature of 50 ° Maximum temperature of 550 °, the temperature can be adjusted within a wide range.
   • Three-speed electronic circuit to control air flow:190-350L/MIN
   • 20 seconds off delay, effectively extending the heater core life.
Application
1.Tin desolding ,thaw, depainting, plastic heating, lab vessel cleaning, liquid heat  ergy transfer, bond intenerating etc.
2.Various of nozzles and spare parts for choice;
3.Maximum power consumption reach 1600W,temperature 50-550°C,High efficiency and easy operating;
4.Temperature adjustable system.
Â
Hydraulic Flange fitting inculde SAE Code 61 and Code 62 Code 61 hydraulic fitting flange is intended for for pressures up to 3,000 psi. Code 62 is intended for up to 6,000 psi. Bolt hole spacing and flange fittinghead diameters are larger for the higher pressure Code 62 fittings.
The female port is an unthreaded hole with four bolt holes in a rectangular pattern around the port. The male hydraulic fitting is a flanged head, grooved for an O-ring, and either a captive flange or split flange halves with bolt holes to match the port. The seal takes place by compressing the O-ring between the flanged head and the flat surface surrounding the port. The threaded bolts hold the hydraulic connection together.
Industrial Portable Rechargeable Heat Gun Temperature Machine
Model NO.: JF-1600WD
Weight: 950g
Power Plug: Two Plug
Air Flow: 300-500L/Min
Noise Decibels: 45
Trademark: Suwaie
Specification: 24.5*20cm
Origin: China
HS Code: 8205590000