In addition to pesticides in farmyard manure

There are many pests in farmyard manure, such as cockroaches and worms. If they are not treated or handled improperly, the pests will multiply and will harm the crops after application.

The chicken and duck manure are flattened, dried, and finely mixed with 1 kg of phoxim per cubic meter. After mixing, pile up into a truncated cone shape, flatten with mud paste, and apply after 15-20 days.

Fresh cow dung and sheep manure are mixed with 30% ash, and then spread to 10 cm thick, and 1 kg of liquid is sprayed per square meter. Formulation: The ratio of water, 1605, and carbendazim is 100:0.2:0.3.

When the human pig manure is half-dried, it is piled up in a round table shape with a height of 50 cm. It is flattened with mud paste, and several infiltration holes are inserted into the top with a wooden stick. The hole depth is 40 cm, and then the liquid is filled. Preparation of liquid medicine: the ratio of water to trichlorfon is 100:0.5.
【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

Axial Flow Pumps

Axial Flow pumps have lower heads but higher flow rates and are extremely versatile in low lift areas. The axial flow pump is divided into three types: vertical, horizontal and inclined, and its basic structure is the same. The impeller is fixed to the lower end of the pump shaft. There are usually 4 to 5 blades on the impeller. The blades are available in fixed, semi-adjustable and fully adjustable versions. The latter two can adjust the mounting angle of the blades within a certain range for efficient operation. The blades are bolted to the hub, the base of the blade is engraved with a reference line, and the hub has several mounting angular positions. The adjustment method is as follows: first remove the impeller, loosen the bolts, mobilize the blades to align the reference line with the required angular position line, and then tighten the bolt. This adjustment method is called semi-adjusting. The full adjustment is achieved by a special adjustment mechanism to adjust the blade mounting angle. The role of the guiding impeller is to convert the kinetic energy of the rotary motion of the impeller outlet liquid into pressure energy to avoid the impact and vortex loss caused by the rotation of the liquid.

Axial Flow Pumps,Mechaincal Seal Pump,Skf Bearing Pump,Overflow Elbow Pump

Sichuan Zigong Industrial Pump Co.,Ltd. , https://www.zgpump-global.com