1, the characteristics of ceramic wall tiles Ceramic wall tiles are an indispensable wall decoration package in home decoration. Ceramic wall tiles have low water absorption, and have strong anti-corrosion and anti-aging properties. In particular, its special resistance to moisture, scrub, weather resistance, other packaging can not be replaced, its low price, rich colors, is the home decoration in the kitchen, bathroom, balcony wall surface ideal packaging. 2. Types and specifications of ceramic wall tiles Decorative bricks for wall decoration can be divided into two categories. The first type is glazed brick. The surface of this brick is coated with a layer of colored glaze. After being processed and fired, it has rich color variations and is particularly easy to clean and maintain. It is mainly used for wall decoration of kitchens and bathrooms. The other is a whole body brick, hard texture, good impact resistance, anti-aging, does not fade, but mostly a single color, mainly for the decoration of the balcony wall. The shape of the ceramic glazed tile is mostly rectangular, and it can be erected and pasted when used, which can increase the visual height after decoration. There are 60 mm × 240 mm, l00 mm × 200 mm, 1l5 mm × 240 mm, 150 mm × 200 mm, l50 mm × 225 mm, 200 mm × 300 mm and other specifications, thickness between 6-l0 mm, You can choose according to your needs. The body bricks are mostly long strips, and they should be pasted horizontally to give people a feeling of stability. They are 45mm x 95mm, 45mm x 195mm, 50mm x 100mm, 50mm x 150mm, 50mm. Millimeters × 200 mm, 60 mm × 240 mm and other specifications, thickness is generally 6-8 mm, can be selected according to need. 3, the quality of ceramic wall tiles should mainly grasp the following points: (1) The distributor shall ask for the quality inspection certificate and quality inspection report of the product. (2) Perform visual inspection at the site to observe whether the product has obvious quality defects such as missing sleeves, spots, cracks, axial blister, corrugations, etc. The above defects must not be used. (3) Listen to the sound: When tapping with a hard object, the crisper the sound, the higher the porcelainity and the better the quality. You can also use your left thumb, forefinger, and middle finger to clip a corner of the tile. Hang it down easily and tap the lower part of the tile with your right index finger. If the voice is clear and sweet, it is the top grade. If the sound is boring, the turbidity is the next product. (4) Dripping test: The water droplets can be on the back of the tile to see the speed of infiltration after the water is dispersed. In general, the slower the water absorption, the greater the density of the tile; on the contrary, the faster the water absorption, the denser the density, and its inherent quality. The former is excellent. (5) Hand detection. After the two bricks are clamped by the fingers and hit each other, the sound is crisp and loud and it is a qualified product. The low soundness of the sound must have inherent quality defects. (6) to distinguish the color: As a large number of wall tiles to buy a large number of packages if there is a significant color difference, the effect of decoration is very affected, it is necessary to sample all products compared, observe the color change, color difference Big ones can't be used. (7) Diameter: The higher the accuracy of the tile side length, the better the effect after paving. Buying high-quality tiles is not only easy to construct, but also saves man-hours and accessories. Using a tape measure to measure the size of each tile, whether there is any difference in the circumference, the product with a size error of more than 0.5 mm and a flatness of more than 0.1 mm will not only increase the difficulty of construction, but also have a poor effect after renovation and cannot be used for engineering. 4. Tiles can be divided into wall tiles and floor tiles according to their locations. The main difference between the two is that the water absorption rate of tiles is much lower than that of wall tiles. Wall tiles strictly speaking should belong to ceramic products, and floor tiles are usually porcelain products. Both have great differences in the selection of clay ingredients and firing techniques, resulting in their physical characteristics are also very different, wall tile absorption rate of about 10%, while the floor tile water absorption rate is usually only about 1%. Floor tiles for low water absorption should be laid on the floor of the bathroom and kitchen. Because the ground will often wash with a lot of water, so that tiles can not be affected by water vapor, do not absorb stains, and wall tiles used on the ground, because of too much water and become difficult to clean. Wall tiles are made of glazed ceramics and have a high moisture content. Their backs are generally rough. This also helps adhesives attach wall tiles to walls. Floor tiles are not easily affixed to the wall. Visible walls Floor tiles cannot be mixed. Tiles Buying Building Materials Knowledge Tiles Home Furnishing Decoration Floor Tiles Kitchen Wall Tiles Bathroom Tiles Color Bathroom Tiles Bathroom Tiles Bathroom Tiles Bathroom Tiles Price Kitchen Tiles Balcony Tiles Tiles Specifications Led High Bay Light,High Bay Lights,High Bay Light,Led Bay Lights Zhongshan Tiger Lighting Co.,Ltd. , https://www.tigerstreetlight.com
Cano tile   Carrie bathroom   Deller Head