we are specialized Gabion products manufacturers from China, The Gabion also named Gabion Baskets,Gabion Wall,Gabion Retaining Wall,Gabion Cages,Gabion Box,Gabion Basket,Gabion wire mesh ect.
According the processing can be divide PVC coated Gabion Net, Galvanize Gabion Net,welded gabion basket,Galvanized PVC Welded Gabion Box ect.
wholesale high-quality products of Hexagonal Wire Netting R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!
Gabion Baskets Gabion Baskets,Gabion Wall,Gabion Retaining Wall,Gabion Cages,Gabion Fence HUATAO GROUP LTD , https://www.huataogroup.com
If the furniture lacquer is damaged by burning, you can put a fine cloth on the toothpick, gently wipe the traces, and then apply a thin layer of wax, the scorch marks can be removed; if the furniture lacquer is scratched, the available Paint crayons or pigments of the same color in the furniture, cover the exposed surface of the furniture, and then cover the exposed base color, then apply a thin layer of transparent nail polish; if the wax oil drops on the furniture surface, do not use a sharp edge. Or nail scraping, should wait until the daytime light is good, use plastic sheets, hands clasp, tilt forward, slowly scrape the wax oil from the front of the body, and then wipe with a fine cloth.
2, the furniture surface is drum
After the decorative veneer is bubbling, you can use a sharp blade to cut a knife in the middle of the bubble in the direction of the wood grain, then use a syringe to inject the glue into the seam, gently press the finger on the upper part of the bubble, and use the wet cloth to overflow the glue. Clean, and then use a weight that is smooth on the bottom surface and larger than the bubble area. In order to prevent a small amount of glue from overflowing and sticking to the peripheral surface of the bubbling after the pressurization, the plastic film may be covered on the bubble so that the decorative veneer is flat.
3, eliminate water marks
Water droplets on the furniture, if not dried immediately, will leave traces of water stains. In this case, the wet cloth can be used to cover the traces, and then the wet cloth is carefully pressed several times with an electric iron, and the trace moisture will evaporate with heat, and the water mark can be eliminated.
4, repair dents
Some furniture is soft because of the wood, leaving a dent after the collision. At this time, you can use a wet towel to place it in the depression, and then iron it with an iron to restore it. If the dent is deep, add the filling.
5, remove the old paint
If you want to remove the paint from the furniture, you can remove the old paint by applying the failed developer to the painted surface of the furniture. After washing and drying, it can be polished again with fine sandpaper.
6, repair cracks
If the solid wood furniture is cracked due to heat and cold shrinkage, the following remedial measures can be taken; the old cotton cloth or the broken sack is burned to ash, and then mixed with the raw tung oil to form a paste, which is embedded in the crack of the wood, and can be filled after being dried in the shade. cement. Or, tear the newspaper into pieces. Add some alum and water, boil it into a thick paste, apply it to the cracks of the wood after cooling, and it is very firm after drying.
Fast and practical furniture repair methods you must use
After a long time, the furniture is inevitably a little damaged and affects the appearance. Now GO Jiaju Xiaobian teaches you how to repair furniture, simple, no trouble, just need a little home daily gadgets, and save money!