Three trees paint paint paint home decoration home window Exposed Shower System,Bathroom Shower Mixer System,Modern Bathroom Shower System,Wall Mounted Shower System Kaiping Jenor Sanitary Ware Co., Ltd , https://www.sanitaryjenor.com
â—† Five steps of painting: First, grinding; Second, putty; Third, brush primer; Fourth, topcoat; Fifth, polishing.
Check the surface of the wall. If there is any stain, wipe it with a mild detergent. If the old paint film is loose, it needs to be completely eradicated with a paint shovel. If the wall has nail holes or it is uneven, it needs to be filled with a putty and polished smooth; cover the furniture, floors, doors and windows with old paper or adhesive tape, etc. Avoid being stained; wear gloves, wear protective clothing, hats; read the instruction manual for paint oil, dilute the paint according to the instructions and mix evenly; start with the ceiling first, then the wall, follow the order from top to bottom, apply One layer of primer; Repeatedly applying two layers of paint to obtain the best results; used tools should be cleaned as soon as possible; undiluted residual oil can be stored in sealed containers for later use; the paint should not be left untouched. Pour into the drains will cause environmental pollution. The remaining paint can be disposed of in old newspapers before it is dried.
â—†Friction paint operation common four major problems:
1. Is the quality of hand painting or painting quality good?
A: Some home renovations use a blending process (using blending lacquer, etc.). For those who do not understand construction, this practice seems to be easier than varnish. In reality, this practice is much more difficult than varnish. The painter's craft is a test. Workers with poor workmanship are likely to have brush marks. Therefore, in order to improve the quality of works, many construction sites have recently begun to use the painting process to mix oil. The quality of this practice is indeed much better than manual operation, but the disadvantage is that it wastes material.
2, the ceiling and the wall paint brush a few times?
A: Generally speaking, if the background color of the wall is relatively shallow, the paint on the ceiling and the wall can be brushed twice. However, if the background is darker and the color of the paint to be brushed is lighter, it should be based on the paint. Color cover more than a few times. However, it should be noted that it is not the number of times the paint brush is used as much as possible. If the paint brush has too many passes, peeling and cracking may occur.
3. What protective measures should hardware take when painters paint?
A: We sometimes find that painters brush the paint on the hardware (such as door locks, hinges, etc.) installed on the wood products. As a result, the owner will find the hardware after checking in. The surface was corroded. Therefore, before painting, the painter should attach some single-sided tape to the parts that can be easily brushed to protect the hardware.
4, nitrocellulose varnish on wood products generally at least brush a few times?
Answer: Since the lacquer film of nitrocellulose varnish is relatively thin, the painter should brush several times according to the situation. Generally, he should brush at least six times. However, there is a premise that the painter should clean the surface of the paint before brushing it every time to prevent foreign paint from being covered by the paint on the back.
Comprehensive Analysis: Five Steps and Four Problems in Brush Painting?
Brushing is also a science in the home improvement process. If you have mastered it, you will be able to make it better. If you do not know it, then good materials will not produce good results. Here are five specific steps for the painting process and the actual operation process. Four places to pay attention to.