T5 Aquarium Bulb,T5 Aquarium Lamp,T5 Aquarium Tube,T5 Coral Lamp Changxing leboom lighting product CO.Ltd. , https://www.leboomuvd.com
2X rotary vane vacuum pump how to maintain and maintain
With the development of modern high science and technology, 2X rotary vane vacuum pump is more and more widely used. This also raised the 2X type rotary vane vacuum pump maintenance and repair requirements, then how in the daily 2X type rotary vane vacuum pump for maintenance and repair? 2X rotary vane vacuum pump how to carry out maintenance and repair 1, spin Vacuum pump in the work in addition to Article 15 matters, the following matters need to be noted: (1) rotating vane vacuum pump to be kept clean, the pump shall not be placed on other objects. (2) pay attention to whether the elastic belt is appropriate, the first half of the year to adjust. (3) pipe joints leak, in time to eliminate. 2, rotary vane vacuum pump continuous work in March to six months after the oil should be changed once in the humid area, working in the wet season pump, or was pumping gas pollution, should be shortened according to the specific circumstances of the oil change time. Oil change items are as follows: (1) the rotary vacuum pump vacuum system removed, the one end of the chassis motor pad higher, open the drain plug put the oil, turn the vacuum pump, cover the exhaust port so that the cavity all from the oil drain port Release, and then add 100-500ml of fresh oil from the air inlet to continue the rotation of 5-10 turn on the internal cleaning, take this operation 3-5 times, special oil cleared, and then put the drain plug, the Put the pump flat, add fresh oil separately from the air inlet and the oil hole, and the oil change is completed. (2) oil should not be long time to start the motor, so as to avoid the exhaust valve beating too violent and fatigue. (3) Do not use kerosene, gasoline, alcohol and other non-disassembled pump cleaning. Note: rotary vane vacuum pump the best oil temperature after the increase. 3, such as the rotary vane vacuum pump for a long time, the exhaust hood should be placed on the exhaust plug, closed the air inlet, put net water. Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)